Portenta C33 开发板

[shaoziyang]

Portenta C33 是一款低成本的 Arduino Pro 开发板，基于以 200 MHz 运行的 Renesas RA6M5 Arm Cortex-M33 MCU。它配备了 ESP32-C3 WiFi / 低功耗蓝牙模块，可以用 MicroPython 中进行编程。


 
 

[shaoziyang]

主要参数

• Microcontroller – Renesas R7FA6M5BH2CBG Arm Cortex-M33 microcontroller @ up to 200 MHz with 512KB SRAM, 2MB Flash, Arm TrustZone, and Secure Crypto Engine 9
• Storage – 16 MB QSPI Flash
• Connectivity
  • 10/100M Ethernet PHY
  • ESP32-C3 WiFi and BLE module
• USB – 1x USB Type-C high-speed port with Power Delivery support
• I/Os via 2x 80 pin high-density connectors, Arduino MKR headers with castellated hole, and a 5-pin I2C connector
  • Storage – SD Card
  • Networking – 10/100M Ethernet
  • Audio – I2S, SAI, PDM
  • Serial – CAN Bus
  • Analog – ADC
  • Low-speed I/Os – SPI, I2C, GPIO
  • Debugging – JTAG/SWD
• Security – NXP SE050C2 Secure Element
• Misc – Reset button
• Power Supply
  • Via USB-C PD port
  • Support for 3.7V/700mAH minimum LiPo single-cell battery
• Dimensions – 66.04 x 25.40 mm
• Temperature Range – -40°C to +85°C

[shaoziyang]

https://www.arduino.cc/pro/hardware-pro ... tenta-c33/